Wine
Wine Label QR Codes: A Printer's Checklist
A practical checklist for label printers and wineries: agree the code's purpose, fix the URL, set size and finish, test the proof, and keep records.
By Ali Murtaza ·

A wine label is the one print job where a wrong detail can sit on thousands of bottles before anyone notices. Add a QR code and there is one more thing to get right: a code that looks fine on screen but fails on a foil-stamped, embossed or textured stock. This checklist is written for label printers and for the wineries who brief them. It covers what to agree before artwork is approved, what to test on the proof, and how to keep the code working after the print run is done.
Plain-language guidance, not legal advice. For the e-label rules themselves, check the regulations linked below and ask your importer or a labelling adviser.
Step 1: Agree what the code is for
Before any file is sent, the winery should tell the printer which code this is. Many labels now carry two: one that leads to the legal e-label (ingredients list and nutrition declaration) and one that leads to a brand story page. They have different rules and should not share a page. The legal page must not carry marketing content or track users. Printers do not need to understand the law in detail, but they should ask the question, because it decides how many codes go on the artwork and how each one is captioned.
Under Article 119 of Regulation (EU) No 1308/2013, as amended by Regulation (EU) 2021/2117, ingredients and nutrition information for wine products can be provided by electronic means, while the energy value and allergens stay printed on the pack.
Source: Regulation (EU) 2021/2117 amending the CMO rules (EUR-Lex).
Step 2: Get the final URL before artwork is approved
The most common delay is a label designed around a placeholder code. Ask for the final URL early, and print that exact code on the proof. A few points save reprints:
- Use a dynamic, redirecting short URL so the destination can be corrected after printing, while the printed code stays the same
- Never print a code that points to a staging, test or temporary address
- Check that the URL is on a domain the winery controls or a service it will keep paying for, because a code outlives the label run
- Use a separate code for each product or each distinct recipe, not one code across a whole range
Our guide to static and dynamic QR codes explains why a redirecting code is the safer choice for a printed label.
Step 3: Set size, contrast and quiet zone
Printers know their presses, so this is where they add the most value. Agree these in writing with the winery:
- A minimum printed size that the winery has tested on real phones, with extra margin for textured paper
- Dark code on a light background, not the reverse. Inverted codes fail on many scanners
- A clear quiet zone around the code, free of text, borders and artwork
- Error correction level chosen for the finish: higher for stocks that may scuff, but remember that higher levels make the code denser
See our wine label QR code size and print specs guide for the detail.
Step 4: Check the finish
Embellishments are where a good code goes wrong. Gloss varnish, hot foil, embossing and metallic stocks all change how light reflects. As a rule, keep the code on a flat, matt, uncoated area, and keep foil and emboss away from it. If the design needs a coloured or metallic background, request a physical test print on the real stock rather than a screen proof.
Step 5: Test the physical proof
A PDF proof cannot tell you whether a code scans on a curved bottle in a dim cellar. Build these checks into the proof stage:
- Scan the printed proof with at least three different phones, an older one included
- Scan it applied to a bottle, because curvature distorts the code
- Scan in low light and under shop lighting
- Confirm the page that opens is the right product, the right vintage and the right language
- Confirm the captioning words next to the code, such as "Ingredients and nutrition", are readable
The European Commission's Q&A on the wine labelling provisions says the link should be identified as leading to this information, and that a lone symbol is not enough.
Guidance: European Commission Q&A on the EU wine labelling provisions (EUR-Lex).
Step 6: Control versions between vintages
A new vintage often means a new label file, and that is where the wrong code gets reused. Agree a naming convention that ties each file to a vintage and a code, and have the winery sign off the code as well as the artwork. If the recipe or nutrition values changed, the old page may no longer be right for the new bottles. Our guide to e-labels and new vintages covers when you need a new one.
Step 7: Keep a record after delivery
Once the run ships, keep the approved proof, the code and the URL together. If a code later needs to point somewhere else, or a batch is queried, you can show what was printed. Printers who hand clients this one-page record tend to win repeat orders, because the winery can find everything in one place.
Printer's quick checklist
- Purpose of each code confirmed (legal e-label, brand story, or both)
- Final URL supplied and printed on the proof
- Dynamic, redirecting code on a domain the winery keeps
- Size, contrast and quiet zone agreed
- Code placed on flat matt stock, away from foil and emboss
- Physical proof scanned on three phones, on a bottle
- Page content matches the vintage and language
- Approved proof and URL filed with the job
How Tapline fits
Tapline is for the brand-story code, not the legal e-label page. Each code gets a story page, scan counts per code so a winery can see how a label performs, and a reorder button on the Growth plan and above. Multi-language story pages are available on the Scale plan. Shopify sync (live price and stock) is available on the Scale plan. Printers can ask wineries for the code and URL up front, so the proof carries the real thing.
See how it works for wineries on the wine page.
Related guides
- Wine label QR code size and print specs
- Static vs dynamic QR codes on wine labels
- Two QR codes on a wine label
- Wine e-labels and new vintages
- How to choose a wine e-label generator
FAQ
Who is responsible for the QR code on a wine label, the printer or the winery?
The winery is responsible for the label content and the page behind the code. The printer is responsible for printing it faithfully and legibly. Agreeing this in the brief avoids disputes.
Can a printer generate the QR code for the client?
Yes, but the winery should own the destination. A code generated by a printer that points to the printer's own server can break the link when the relationship ends.
Does foil or embossing stop a QR code from scanning?
It can. Reflective or raised areas interfere with phone cameras. Keep the code on a flat matt area and test a physical proof on the real stock.
How many QR codes can go on one wine label?
There is no fixed limit in the rules, but the legal e-label code and a brand-story code should be separate and clearly captioned, so two is common.
Do I need a new code for every vintage?
Not always, but check. If the recipe, ingredients or nutrition values changed, the page must be updated or a new code used so the information matches the bottle.