Home and electronics
QR Codes for Product Manuals: EU Rules for 2027
Can a QR code replace the paper manual? What the EU product safety and machinery rules say about digital instructions, and how to put a manual behind a code.
By Ali Murtaza ·

Kettles, lamps, speakers, chargers and small appliances all ship with a booklet that most buyers lose within a week. A QR code on the product or the box that opens the manual, the set-up guide and the warranty page is an obvious fix. The question brands ask is whether that code can replace the paper. In the EU the honest answer is: sometimes, partly, and only if you follow the rule that applies to your product. This guide walks through the two rules that matter most for consumer goods and electronics, and how to set up a manual page that holds up.
Plain-language guidance, not legal advice. Check the regulations linked below, and any product-specific rules (radio equipment, toys, batteries, energy labelling) with your compliance adviser.
The default rule: instructions must accompany the product
Most consumer products sold in the EU fall under the General Product Safety Regulation, Regulation (EU) 2023/988, which has applied since 13 December 2024. Article 9(7) says manufacturers must ensure their product is accompanied by clear instructions and safety information in a language consumers can easily understand, as decided by the Member State where it is sold. The duty does not apply where the product can be used safely and as intended without instructions.
The important word for QR codes is in Article 21. It lets businesses additionally make the information required by Article 9(5), (6) and (7) available in digital format, through an electronic solution clearly visible on the product, its packaging or an accompanying document. Additionally means the code sits alongside the required information, not instead of it. Under the general safety rule, a QR code is a bonus, not a replacement for the safety information that comes in the box.
Source: Regulation (EU) 2023/988, Articles 9(5)-(7), 19 and 21 (EUR-Lex).
Machinery and related products: digital manuals allowed from 14 January 2027
Machinery has its own rule. The Machinery Regulation, Regulation (EU) 2023/1230, applies from 14 January 2027 and replaces the old Machinery Directive. It covers more than factory equipment: many powered tools and garden machines, and other products with moving parts driven by a motor, can fall within its scope, so check whether your product is in it.
Article 10(7) is the first EU rule that clearly says instructions for use may be provided in a digital format. When a manufacturer chooses digital instructions, it must:
- mark on the product, or where that is not possible on the packaging or an accompanying document, how to reach the digital instructions;
- present them so the user can print them, download them and save them on a device, so they are available even when the machine breaks down;
- keep them online for the expected lifetime of the product and for at least 10 years after it was placed on the market;
- provide a paper copy free of charge within one month if the user asks for it at the time of purchase;
- still supply in paper the safety information essential for putting the product into service and using it safely, where non-professional users could use it.
The instructions must also clearly describe the product model they belong to, and be in a language users can easily understand, as decided by the Member State concerned.
Source: Regulation (EU) 2023/1230, Article 10(7) and Article 54 (EUR-Lex).
What the two rules mean in practice
| Question | General products (GPSR) | Machinery (from 14 Jan 2027) |
|---|---|---|
| Can the full manual be digital only? | No, the code is in addition to the required instructions | Yes, if Article 10(7) is followed |
| Paper safety information? | Yes, where instructions are needed | Yes, for products non-professionals may use |
| Paper copy on request? | Not covered by Article 21 | Free within one month, if asked at purchase |
| How long must it stay online? | No fixed period in Article 21 | Product lifetime and at least 10 years |
| Language | Easily understood, set by each Member State | Easily understood, set by each Member State |
Products covered by other EU harmonisation laws, such as radio equipment, toys, low-voltage electrical equipment or batteries, may have their own instruction rules. Article 21 of the GPSR applies without prejudice to those rules, so check them first.
Five things a manual QR code page should do
- Name the exact model, and where useful the batch or serial, so the buyer knows the page matches the unit in their hand.
- Offer the manual as a file people can download and print, not only as a web page or video.
- Put safety warnings first, above set-up tips, accessories and reorder links.
- Show the manufacturer's name and postal and electronic contact address, the same details GPSR Article 9(6) requires on the product.
- Keep the same address working for years. A code that points at a page you can update means a new manual version does not need a reprint, but only if the page stays online.
Online shops need the same information
If you sell online, GPSR Article 19 says the offer must clearly show the manufacturer's name and contact address, a picture and type or other identifier of the product, and any warnings or safety information that go on the product or in the documents with it. A manual page behind a QR code does not take this off your product listing; the two should match.
Where Tapline fits
Tapline gives each product a page behind a QR code that you can edit at any time without reprinting. For home goods and electronics, that page can carry links to the manual and set-up guides, to your warranty registration, and to spare parts and accessories. A reorder button to your own shop is available on the Growth plan and above. Multi-language pages are available on the Scale plan, which helps when one box is sold in several EU markets.
Tapline also offers item-level codes with serial or batch numbers, GTIN and GS1 Digital Link, with QR downloads as SVG, PNG or ZIP for your printer. That pairs well with the GPSR duty in Article 9(5) to mark products with a type, batch or serial number, though the printed number on the product is still what the law asks for. You can see the number of scans on each code. The product passport for home and electronics lets you state who made the product and how to identify it; Tapline shows what you enter and does not verify it, and it is not a legal product passport.
Tapline does not decide whether your product may go paper-free. That depends on your category and your adviser.
See how it works for appliances and electronics: Home and electronics use case.
Watch the short demo of Tapline's product categories: Tapline videos.
Read about product passports: Digital Product Passport.
Related reading
- QR code vs NFC tag
- QR codes on product packaging
- Add a reorder button to packaging
- A packaging QR page template
FAQs
Can a QR code replace the paper manual in the EU?
For most consumer products under the General Product Safety Regulation, no: Article 21 allows digital information in addition to the required instructions and safety information. For machinery and related products, Article 10(7) of Regulation (EU) 2023/1230 allows digital instructions from 14 January 2027, with conditions including paper safety information and a free paper copy on request.
When does the new Machinery Regulation apply?
From 14 January 2027, under Article 54 of Regulation (EU) 2023/1230. A few articles applied earlier.
How long must a digital manual stay online?
Under the Machinery Regulation, for the expected lifetime of the product and at least 10 years after it was placed on the market. Choose a link and a provider you expect to keep for that long.
Does the QR code need to be on the product itself?
Both rules prefer the product. Where that is not possible, the packaging or an accompanying document is allowed.
Can the manual page show accessories and reorder links?
The rules above do not ban it, but keep safety information first and easy to find, and make sure the manual itself can be downloaded and printed.
Do I need one code per unit?
Not for a manual: one code per model is usually enough. Item-level codes with serial numbers help when you want warranty registration or spare parts tied to a specific unit.