Beer and cider
UK DRS Labels for Beer and Cider: What Changes in 2027
What the UK Deposit Return Scheme means for beer and cider cans from 1 October 2027: scheme logo, registered barcode, low volume lines and QR codes.
By Ali Murtaza ·

From 1 October 2027, most canned beer and cider sold in the UK will carry a 20p deposit, a new scheme logo and a barcode registered with the scheme. That means new artwork for every can and PET bottle design. This guide sets out what the Deposit Return Scheme (DRS) rules actually require on the pack, which products are out of scope, and how to use the redesign to add something drinkers will actually scan. It is general information based on the regulations and the scheme operator's published guidance, not legal advice.
Which beer and cider containers are in scope
In England and Northern Ireland the scheme is set by the Deposit Scheme for Drinks Containers (England and Northern Ireland) Regulations 2025 (SI 2025/67). Regulation 1(2) says the main rules come into force on 1 October 2027. A "container" under regulation 2 is a bottle or can, including its label and closure, that:
- is made wholly or mainly from an in-scope material, which regulation 2 defines as aluminium, PET plastic or steel
- holds at least 150 ml and no more than 3 litres
- is likely to be used only once, or for a short time, before being thrown away
So a 330 ml or 440 ml can of lager, IPA or cider is in scope, and so is a 2 litre PET bottle of cider. Glass bottles are not in scope in England and Northern Ireland. Wales is including single-use glass, but Exchange for Change, the scheme operator, says no deposit or DRS-specific labelling will be needed on glass supplied in Wales until October 2031. Scotland is bringing in its own legislation, so check the Scottish rules separately if you sell there.
GOV.UK guidance says producer duties fall on the brand owner, on importers, and on businesses that fill and seal containers to order. A taproom filling crowlers for takeaway counts as a producer for those containers.
What has to be on every can
Regulation 24(1) says a scheme supplier must not supply a deposit item unless it carries two things: the required item logo and a scheme return code. This applies whether or not the can is sold in a multipack. Regulation 24(2) adds that a multipack containing deposit items must carry the scheme packaging logo, if the operator issues one.
| Element | What the rules say | Where it comes from |
|---|---|---|
| Scheme logo | One logo issued by the deposit management organisation to identify a deposit item. The operator sets the date from which a new or replacement logo must be used. | SI 2025/67, regs 24(1)(a) and 55 |
| Scheme return code | A code that, when scanned electronically, identifies the registered producer and meets any technical or security requirements the operator sets. | SI 2025/67, regs 24(1)(b) and 57 |
| Packaging logo | Only if the operator issues one, on multipacks such as 4-can wraps and cases. | SI 2025/67, reg 24(2) |
| Deposit | 20p per container, including each can in a multipack. | Exchange for Change FAQs |
Exchange for Change has published its logo regulatory requirements. They say each in-scope item carries a single instance of the logo, the portrait primary logo is the default, and the landscape version is only for cases where space or layout prevents the primary logo from being applied clearly. The document also sets minimum and maximum sizes, clear space and approved colours, so the artwork files you use should come from the operator's resources page.
The barcode change most brewers miss
The return code is the part that catches people out. Exchange for Change's FAQs say every in-scope product needs a DRS-compliant barcode registered with the scheme, and that existing barcodes will need to change so the product links to the scheme's article list and can be accepted by reverse vending machines and counting centres. International barcodes used across several markets can still be used, but may attract an extra charge on top of the standard producer fee.
Two timing points matter for print runs. First, cans with the new registered barcode and the scheme logo must not be sold to consumers before 1 October 2027, so stock printed early has to be flagged to your customers as DRS items for supply from that date. Second, the operator says it is still exploring a transition period for non-DRS stock left in the supply chain after launch, and will publish details later. Plan for a clean switchover rather than counting on a long sell-through.
Producer registration with Exchange for Change runs in two phases: Phase 1 from September 2026 and Phase 2 from January 2027. Phase 2 asks for container specifications such as material, label and adhesive type, closure, dimensions, barcode number and colour, which your can supplier or printer can usually provide.
Small batches: the low volume exemption
Many small breweries make short runs, and the regulations cover that. Under regulation 18(1), a producer can register a product line as a low volume line if it will not exceed 6,250 containers in the first scheme year (1 October 2027 to 31 December 2028) or 5,000 containers in any later year, filled with the same drink. A registered low volume product is not a deposit item under regulation 4(1).
The catch is that regulation 25(1) forbids supplying a registered low volume product that carries the scheme logo or a scheme return code. So a limited release that you register as low volume should go out without the DRS marks, even if your core range carries them. Keep separate artwork templates for core beers and small batches, and decide which lines you will register before the cans are printed.
Use the refresh to add a QR code drinkers want
The scheme return code is for machines: it identifies your product to the return system. It is not a link for drinkers, and you should not assume any QR code you add can stand in for it. Check the operator's code requirements before you plan any combined code, and keep your own brand code visibly separate from the DRS barcode and logo so neither gets confused at the till or the return point.
Since the artwork is being redone anyway, add a dynamic brand QR code that does a job the label cannot. One code per beer is usually enough, with its own code for each limited edition:
- Tasting notes, hops and malts, and the story behind each beer
- Where to buy, taproom opening times and events
- New release and seasonal announcements
- A reorder button that sends drinkers to your own webshop for the next case
How Tapline fits
Tapline gives each beer or cider a story page behind its QR code that you can update without reprinting the can. You write the content, and Tapline shows what you enter, so claims stay your responsibility. Every plan shows scan counts per code. On the Growth plan and above you can add a reorder button that links to your own shop, and email sign-ups for new releases are stored in Tapline for you to export. Multi-language pages are on the Scale plan, which helps if the same can also ships to EU markets.
If you want a code per can or per batch, item-level codes give each unit a serial and batch and, with a GTIN, a GS1 Digital Link address, and you can download the codes as SVG, PNG or ZIP for your can printer. Tapline does not issue DRS scheme return codes; those come through your registration with Exchange for Change. Klaviyo sync is coming soon.
See how breweries and cider makers use Tapline on the beer and cider use case.
Watch how a drinker reorders straight from the pack in the reorder demo.
See how one page can change after the label is printed in the print once demo.
Related guides
- QR codes on beer and cider labels: EU rules and ideas
- How to add a reorder button to packaging
- QR codes on product packaging
- What a QR code actually costs
- Free template: what to put behind your packaging QR code
FAQ
When does the UK Deposit Return Scheme start?
The main rules of SI 2025/67 for England and Northern Ireland come into force on 1 October 2027, and Exchange for Change says the scheme logo becomes mandatory on in-scope containers from that date.
Do small-batch beers need the DRS logo?
Not if you register the line as a low volume line under regulation 18 of SI 2025/67. Regulation 25 then forbids putting the scheme logo or return code on those cans.
Can my brand QR code be the DRS return code?
Do not assume so. Regulation 57 lets the operator set the technical and security standards for return codes, so check its requirements first and keep your marketing code separate.