Wine
Fortified Wine E-Labels: Port, Sherry and Madeira
Why port, sherry and other liqueur wines need an EU ingredients list and nutrition declaration, what stays on the bottle, and how a QR code carries the rest.
By Ali Murtaza ·

Port, sherry, Madeira, Marsala and other fortified wines sit in an awkward spot. Many people think of them as close to spirits, but in EU law they are wine products, and that means the wine e-label rules apply to them in full. This guide explains why fortified wines need an ingredients list and a nutrition declaration, what has to stay printed on the bottle, how the higher alcohol and sugar change the energy value, and how a QR code can carry the rest.
Plain-language guidance, not legal advice. Check the regulations linked below and the rules of your protected designation for your own wines.
Fortified wine is "liqueur wine" in EU law
The EU wine rules list the categories of grapevine products in Annex VII, Part II of Regulation (EU) No 1308/2013. Category 3 is "liqueur wine", which covers wines fortified with grape spirit or distillate, such as port, sherry, Madeira, Marsala, Málaga, Banyuls and Muscat de Rivesaltes. Because liqueur wine is one of those wine product categories, it falls under the same labelling article as still and sparkling wine, and not under the spirit drinks regulation.
That difference matters. Spirit drinks such as brandy or gin are not yet required to show an ingredients list or a nutrition declaration in the EU. Liqueur wines are, because they are covered by Article 119 of Regulation (EU) No 1308/2013, as amended by Regulation (EU) 2021/2117.
Source: Regulation (EU) No 1308/2013, Annex VII Part II and Article 119 (EUR-Lex).
What the e-label rules require
Since 8 December 2023, wine products produced from that date and placed on the EU market must give a list of ingredients and a nutrition declaration. Both can be given by electronic means, usually a QR code, under three conditions: the energy value stays printed on the bottle, allergens stay printed on the bottle, and the e-label page shows no sales or marketing information and does not collect or track user data. Wines produced before 8 December 2023 may be sold until stocks run out, which matters for fortified wines that are aged for years before release.
Source: Regulation (EU) 2021/2117 amending the CMO rules (EUR-Lex).
Guidance: European Commission Q&A on the EU wine labelling provisions (EUR-Lex).
Old stock, long ageing and the production date
A tawny port or an old oloroso may have been in barrel for many years. The Commission's guidance links the obligation to when the wine was produced, so older wines in stock may fall outside the new rules. For blends and solera wines this is not always clear-cut, because a single bottling can combine wine from many years. If you are unsure, the safest choice is to give the ingredients and nutrition information for every new bottling anyway. It costs little once the e-label page exists, and it avoids arguments with importers and inspectors.
Ingredients in a fortified wine
The ingredients list starts with grapes and includes the other ingredients used, in descending order of weight. For fortified wines the main points to think about are:
- The grape spirit or wine distillate used for fortification is an ingredient and should be listed.
- Concentrated grape must, rectified concentrated grape must or caramelised must, where used for sweetening or colour, are ingredients too.
- Additives such as preservatives and acidity regulators are listed by category and name or E-number, following the wine rules.
- Processing aids that do not remain in the wine are not listed, but allergenic ones that remain must be declared as allergens.
Our ingredients list guide goes through the naming rules, the "contains" shortcuts for some additive groups, and how to handle substances that vary from batch to batch.
Energy value: why it is higher
The energy value is the one nutrition item that must stay printed on the label, per 100 ml, and it may be shown with the symbol "E". Fortified wines usually show much higher figures than table wine, for two reasons. Alcohol provides 7 kcal per gram, and liqueur wines are typically between 15% and 22% vol. Sweet styles also contain a lot of residual sugar, which provides 4 kcal per gram. A dry fino and a rich ruby port can therefore have very different energy values, and both will be well above a dry table wine.
Use your lab analysis for alcohol, sugar and total acidity rather than generic table values, and recalculate whenever a new bottling has a different specification. Our wine calorie guide shows the calculation step by step.
What must stay printed on the bottle
- The compulsory particulars for liqueur wine, including the category or protected designation, alcoholic strength, net volume, provenance and bottler or importer details.
- The energy value per 100 ml.
- Allergens such as sulphites, and egg or milk products where they have to be declared.
- The QR code, introduced with a heading that contains the word "ingredients" when it leads to the ingredients list.
- Any particulars required by the rules of your protected designation of origin, such as age indications or style terms.
Allergens in fortified wine
Sulphites are the usual case. If the wine contains more than 10 mg/l of sulphur dioxide, "contains sulphites" or an equivalent in the market's language must be printed on the label, not only on the e-label. Some fortified wines are fined with egg or milk proteins; if a residue remains, that allergen must also be printed. Our allergen guide covers the wording and the use of pictograms.
Languages for export markets
Port, sherry and Madeira sell across many EU countries. The ingredients list and nutrition declaration must be in a language easily understood in each market where the wine is sold. An e-label page can show several languages, or detect the reader's language, which saves printing a different back label for each country. Read our languages guide for which markets need which languages.
Two codes: one legal, one for the story
Fortified wines often have a rich story: the lodge or bodega, the solera system, the age statement, serving temperature and food pairings. None of that belongs on the e-label page, which must stay free of marketing. A common answer is a two-QR back label: one code labelled for ingredients that opens the legal e-label, and a second code for the brand story, cocktails, pairing ideas and reorders.
How Tapline fits
For the brand-story code, Tapline gives each code a story page, scan counts per code so you can see which bottlings and batches get scanned, and a reorder button on the Growth plan and above. A story page can be shown in several languages on the Scale plan. Shopify sync (live price and stock) is available on the Scale plan. Keep the legal e-label page separate, free of marketing and free of tracking, as the rules require.
See how it works for wineries on the wine page: /wine
Related guides
- Two QR codes on a wine label
- How to write a wine ingredients list for an EU e-label
- How to calculate wine calories for an EU e-label
- Wine allergen labelling: sulphites, egg and milk
- Wine e-label languages: what each EU market needs
- QR codes on spirits labels
FAQ
Do port and sherry need an EU e-label?
They need an ingredients list and a nutrition declaration, because they are liqueur wines under EU wine law. An e-label behind a QR code is one allowed way to provide them; printing them in full on the label is the other.
Are fortified wines treated as spirits for labelling?
No. Liqueur wine is a wine product category in Annex VII of Regulation (EU) No 1308/2013, so it follows the wine labelling rules, including Article 119. The grape spirit added during fortification does not turn the wine into a spirit drink.
Can the energy value go only on the e-label?
No. The energy value must be printed on the bottle. The full nutrition declaration can sit on the e-label page.
What about bottles produced before 8 December 2023?
Wines produced before that date may be sold until stocks are exhausted without the new information. For long-aged and blended wines, check the guidance carefully, and consider adding an e-label to new bottlings anyway.
Can I put cocktail recipes on the e-label page?
Not on the legal e-label page, which must not carry marketing. Put recipes, pairings and your story on a separate page reached by a second code.