Spirits
Gin Labels: EU Rules for Gin, Distilled and London Gin
What the EU Spirit Drinks Regulation says about gin, distilled gin and London dry gin labels, the 37.5% and dry rules, and what a QR code can add.
By Ali Murtaza ·

Gin is one of the most tightly defined drinks in EU law. Whether your bottle can say "gin", "distilled gin", "London dry gin" or only "spirit drink" depends on how it is made, its strength and how much sugar goes in, and the name you are allowed to use decides most of the label. This guide walks through the three gin categories in the EU Spirit Drinks Regulation, the other label rules that catch small distillers out, and how a QR code on the bottle can carry the botanical story and the next sale without touching the legal text. It is general information, not legal advice.
The three gin categories
Regulation (EU) 2019/787 sets out the categories of spirit drinks in Annex I. Gin has three of them, and each one builds on the last:
| Legal name | How it is made | Minimum strength | "Dry" allowed? |
|---|---|---|---|
| Gin (category 20) | Ethyl alcohol of agricultural origin flavoured with juniper berries (Juniperus communis L.). Flavouring substances or preparations may be used, as long as juniper is the predominant taste. | 37.5% vol | Yes, if added sweetening is no more than 0.1 g per litre, expressed as invert sugar |
| Distilled gin (category 21) | Made by distilling ethyl alcohol of agricultural origin of at least 96% vol in the presence of juniper berries and other natural botanicals, with juniper predominant. The distillate may be combined with ethyl alcohol of the same composition, purity and strength, and flavourings may also be added. Gin made simply by adding essences or flavourings to alcohol is not distilled gin. | 37.5% vol | Yes, same 0.1 g per litre limit |
| London gin (category 22) | Distilled gin whose flavour comes only from distilling the alcohol with all the natural plant materials used. The distillate must reach at least 70% vol, any alcohol added afterwards has a methanol limit of 5 g per hectolitre of pure alcohol, it is not coloured, not sweetened beyond 0.1 g per litre, and contains nothing else except water. | 37.5% vol | Yes, "London gin" may be supplemented by or incorporate "dry" |
Two practical points follow. First, "London gin" is a production method, not a place: a London gin can be made anywhere, as long as it meets category 22. Second, a gin finished with a botanical tincture, a colour or a touch of sugar above the limit cannot be called London gin, even if the base distillation would qualify. It may still be a distilled gin or a gin.
The legal name has to be on the label
Article 10(1) of Regulation (EU) 2019/787 says a spirit drink must bear its legal name in its description, presentation and labelling, and that the legal name must be shown clearly and visibly on the label and not replaced or altered. A product that meets a category must use that category's name (Article 10(2)). A product that does not meet any category must be called "spirit drink" (Article 10(3)).
This is where gin liqueurs, low-strength gins and flavoured "pink" bottles need care. Article 10(7) prohibits using a legal name such as "gin" for any beverage that does not meet the category, and the ban also applies with words such as "like", "type", "style", "made" or "flavour". So a 20% vol juniper drink cannot be sold as "gin", and "gin-style" does not get around the rule. Compound terms and allusions under Articles 11 and 12 have their own conditions, so check them before you design a label around one.
Other rules distillers often miss
- "Dry" on a gin label is governed by the categories themselves. Article 10(6)(f) lets "dry" supplement a legal name only where the drink has not been sweetened, but it expressly defers to the specific rules in categories 20 to 22, which allow up to 0.1 g of sweetening per litre.
- Naming the base spirit, for example "made from grape spirit", is allowed only if the alcohol comes exclusively from that raw material (Article 13(1)). If several bases are used, list each in descending order by volume of pure alcohol.
- A place of provenance on the label, other than a geographical indication or trade mark, must be where the stage that gave the finished drink its character took place (Article 14(1)).
Ingredients, nutrition and the alcohol strength
Gin sits under the general food labelling rules too. Article 9(1)(k) of Regulation (EU) No 1169/2011 makes the actual alcoholic strength by volume mandatory for drinks above 1.2% vol. Article 16(4) of the same Regulation says the ingredients list and the nutrition declaration are not mandatory for drinks above 1.2% vol, unless other EU rules require them. That is the main difference from wine, which has had to give ingredients and nutrition information, on the label or behind a QR code, since 8 December 2023.
Many spirits brands now publish ingredients and energy values online anyway, under the industry's voluntary commitment. If you do the same, keep that information on a clean, factual page and keep marketing on a separate page or a separate code. Our spirits label guide covers where the voluntary pledge stands.
This guide covers EU rules. Great Britain has its own spirit drinks rules, so check the GB position separately before printing for the UK market.
What a QR code on a gin bottle is good for
A gin label has very little room once the legal name, strength, volume and allergens are in place, and gin drinkers want to know more than ever about what goes into the still. A code on the back label can carry what the front cannot:
- The botanical list and where each one comes from, written in claims you can support
- How the gin is made, especially if it is a distilled gin or London gin and that is part of your story
- Perfect serves, garnish ideas and cocktail recipes
- Distillery tours, tasting events and limited editions
- A reorder button so a buyer who loved the bottle can buy the next one from you, not a marketplace
Keep the page factual about the category. If the bottle is a gin under category 20, the page should not describe it as London dry. The same legal name rule applies to your description and presentation, and a QR page is part of how you present the product.
One code per edition, or one per bottle
Most distilleries start with one code per edition: every bottle of the core gin opens the same page. That is enough for serves and story content. Seasonal and limited releases benefit from their own code, so you can see which editions get opened and keep the botanical list accurate for each batch. For numbered or cask-finished releases, item-level codes give each bottle its own serial, which helps with authenticity and with tracing a batch if something goes wrong.
How Tapline fits
Tapline gives each gin a story page behind its QR code that you can update without reprinting the label. You write the botanicals, the method and the serves yourself, and Tapline shows what you enter without checking it, so the legal name and claims stay your responsibility. Every plan shows scan counts per code, so you can compare editions or back-label designs. On the Growth plan and above you can add a reorder button that sends buyers to your own shop, and email sign-ups for new releases are stored in Tapline for you to export. Multi-language pages are on the Scale plan, which helps when the same bottle ships to several EU markets.
For numbered releases, item-level codes give each bottle a serial and batch and, with a GTIN, a GS1 Digital Link address, and you can download the codes as SVG, PNG or ZIP for your label printer. Klaviyo sync is coming soon.
See how spirits and wine brands use a second code on the bottle on the wine and spirits use case.
Watch the short demo of a second QR code for wine and spirits on the videos page.
See how buyers reorder straight from the pack in the reorder demo.
Related guides
- QR codes on spirits labels: rules, ideas and reorders
- EU e-label rules for wine and spirits
- How to add a reorder button to packaging
- QR code vs NFC tag for packaging
- Free template: what to put behind your packaging QR code
FAQ
What is the difference between gin, distilled gin and London gin?
Gin can be made by flavouring alcohol with juniper and other flavourings. Distilled gin must be made by redistilling high-strength alcohol with juniper and other natural botanicals. London gin is a distilled gin whose flavour comes only from that distillation, with no colour, no added flavouring afterwards and no more than 0.1 g of sweetening per litre. All three need at least 37.5% vol under Annex I of Regulation (EU) 2019/787.
Does London dry gin have to be made in London?
No. Category 22 of Annex I to Regulation (EU) 2019/787 defines London gin by how it is produced, not where. Any distiller who meets the production rules can use the name.
Can I call a low-alcohol juniper drink gin?
Not in the EU if it is below 37.5% vol or otherwise misses the category. Article 10(7) of Regulation (EU) 2019/787 prohibits using the legal name for drinks that do not meet it, including with words such as "style", "type" or "flavour".
Does gin need an ingredients list or nutrition table?
Not under current EU rules. Article 16(4) of Regulation (EU) No 1169/2011 makes them optional for drinks above 1.2% vol. The alcoholic strength is mandatory under Article 9(1)(k), and allergens still need to be declared.
Can a QR code replace any of the mandatory gin label text?
No EU rule lets a QR code replace the legal name, strength or other mandatory particulars on a spirit drink. Use the code for extra information and keep everything mandatory printed on the label.